Men's work jacket - single layer

Product detailed description

We recommend washing the product before first use. Prolen® Medical clothing and Prolen® Medical fabrics are made of 100% polypropylene Prolen® Siltex and Prolen® Bodyfresh fibre, which is treated with a permanent antimicrobial treatment on the basis of silver and zinc ions and meets the requirements of health safety according to the current legislation of the Slovak Republic and the European Union. The antimicrobial additive is homogeneously distributed in the mass of Prolen® Siltex and Prolen® Bodyfresh polypropylene fibres with efficacy throughout the lifetime of the final product. The active ingredient with silver and zinc ions provides effective ANTIVIRAL AND ANTIMICROBIAL protection, reduces unpleasant odours, ensures hygienic freshness and cleanliness and reduces the risk of cross-contamination. The antimicrobial additive in Prolen® Siltex and Prolen® Bodyfresh is permanent, does not leak into your skin and does not wash out into wastewater as is the case with surface antimicrobial treated fabrics such as cotton or polyester. The Prolen® Medical product line complies with EN13975-1 (surgical gowns, gowns and clean air garments used as medical devices for patients, medical staff and equipment) and is designed for the control and management of infection in the hospital environment with a major impact on infections associated with medical and nursing care. Composition: 100% polypropylene Prolen® Siltex and Prolen® Bodyfresh

Properties of Prolen® Siltex and Prolen® Bodyfresh

ANTIVIRAL FEATURES: ISO 18184:2019

• SARS-CoV-2 (causing Covid-19 disease): >99% reduction
• Influenza A virus subtype H1N1 >99% reduction

ANTIBACTERIAL FEATURES: AATCC 100:2019

• Klebsiella pneumoniae99.9% reduction
• Staphylococcus aureus 99.9% reduction
• Escherichia Coli 99.9% reduction

CLEAN ENVIRONMENT:

• EN 13795-1 Prolen® Medical 95

HUMIDITY SUPPLY:

• STN EN ISO 11092:2015

HEALTH HAZARD:

• STN 80 0055: 2004 and Regulation (EC) No 1907/2006 - REACH

ECOLOGY AND SAFETY:

• Standard 100 by OEKOTEX, Class 1, Appendix 6 - contact with children's skin

HIGH QUALITY:

• ISO 9001:2015
• EN ISO 14001:2015

SUBSTANTIAL USABLE:

• Minimum 100 standard wash cycles

STERILIZABILITY:

• Can be sterilised up to 135°C.

LIGHTNESS AND COMFORT:

• The fibre density of Prolen® Siltex is 0.9 g/cm3: the fleece floats on water.

ZERO MOISTURE ABSORPTION, HYDROPHONICITY:

• Prolen® fibre absorbs only 0.01% moisture (cotton 8-10%).

RECYCLESIBILITY, LOW ECOLOGICAL IMPACT:

• Polypropylene is 100% recyclable, zero water consumption in production.

No SHORT HAIR AND LASHES:

• The Prolen® Medical product line is made of multifilament fibre without loose ends, not of spun short fibres (cotton), which are released into the environment when rubbed.

Slovak product:

• From the basic raw material, through the fibre to the finishing of the product, the Prolen® Medical range is made in Slovakia, by purchasing this product you are supporting our local economy.

Recommended Use:

The product is suitable for protection for casual wear in hospital facilities, when handling and visiting in medical facilities, clinics, wellness salons, spas, etc. Its material composition provides enhanced protection against viruses and bacteria. It prevents the penetration of foreign substances to the skin. The product is also easily washable from chemical stains and grease with easy and quick drying and without the need for ironing. It is low maintenance.

Recommended treatments:

The Prolen® Medical product can be washed and sterilized several times until it is mechanically damaged. The product lifetime is a minimum of 100 washes with preservation of antimicrobial properties.   Wash between 40ºC and 70ºC, recommended temperature 60°C. Recommended at 400 rpm., max. 600 rpm. Cleaner: any type, disinfectants including chlorine are allowed. To preserve the hydrophobicity of the product, do not use fabric softener. Drying: fast drying, zero water absorption. Dryer: recommended temperature 40ºC / max 40ºCDuration: 20 min. + 5 min. cold. Drying tunnel: recommendation 70ºC, max 70ºC. Ironing: do not iron directly, only low temperature ironing with steam is allowed. After the washing or drying process is completed, it is recommended to hang the garments immediately or fold them to reduce the amount of creases. Sterilization max. up to 135°C.   For more information, visit www.prolenmedical.sk.

For whom Men

Color White, Black, Blue, Green

Clothing size L, M, S, XL, XXL